Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Scudo
  6. : EGR valve

Fiat Scudo - EGR valve

EGR Valve Fiat Scudo (2007-2016 / mk 2)

Fiat Scudo (2007-2016 / MK 2)
How to Replace or Clean the EGR Valve on the Fiat Scudo

In this video tutorial, you will see the main instructions for removing and replacing the EGR valve on the Fiat Scudo in simple and quick steps. First, open …Read all…
Posted on 16 August 2026 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
Replacing the EGR Valve on a Fiat Scudo

The EGR valve must be replaced if damaged, here’s how on a Fiat Scudo. Lift the engine bonnet and secure it, remove the engine soundproofing panel. Unscrew …Read all…
Posted on 8 April 2026 by ScegliAuto

Airbag (1) Alternator (1) Car stereo (1) Battery (2) Transmission (1) Body (3) Key (1) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Dashboard (1) Headlight (1) Tail light (2) Air filter (3) Cabin air filter (8) Diesel fuel filter (3) Light bulb (3) Headlight bulb (2) License plate light (1) Handle (2) Starter motor (1) Transmission fluid (1) Engine oil (1) Clock (9) Door trim panel (7) Brake pads (1) Heater core (1) Fuse box (8) Seat (1) Door lock (1) Side mirror (2) Warning light – error code (4) (1) Service warning light (29) EGR valve (2) Blower motor (2)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos