Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace or Clean the EGR Valve on the Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: EGR valve

See other generations:
Video tutorial

In this video tutorial, you will see the main instructions for removing and replacing the EGR valve on the Fiat Scudo in simple and quick steps. First, open the bonnet of the vehicle and disconnect the hose from the EGR valve by loosening the metal clamp.

Then unscrew the bolts of the valve, disconnecting the electrical connector to remove it, as shown in the video. At this point, clean the valve with appropriate degreasers or opt for replacement if damaged, following the video tutorial to the end!


Updated on 16 August 2026 by ScegliAuto


Related tutorials

Replacing the EGR Valve on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) The EGR valve must be replaced if damaged, here’s how on a Fiat Scudo. Lift the engine bonnet and secure it, remove the engine soundproofing panel. U…
How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…
Removing the Window Regulator Motor from a Fiat Scudo Door
Removing the Window Regulator Motor from a Fiat Scudo Door
Fiat Scudo (2007-2016 / MK 2) Is the window regulator not working on your Fiat Scudo? Remove the door panel to access the window regulator. Disconnect the battery terminals for sa…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos