Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Rear Light and Replace the Bulbs on the Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

The following instructions will show you how to dismantle and replace the rear light and its bulbs on the Fiat Scudo. First, open the rear doors and start unscrewing the fixing screws of the light found on the side; then disconnect the electrical connector of the bulbs to remove it, as shown in the video.

At this point, separate the bulb holder from the lens, removing and replacing any faulty stop lights with new ones; reassemble the light and secure it properly to the bodywork, checking the operation of the lights!


Posted on 1 February 2026 by ScegliAuto


Related tutorials

Fiat Scudo (2007-2016 / MK 2) In this video tutorial, you will find instructions on how to remove and replace the rear light and its bulbs on a second-generation Fiat Scudo. First…
Fiat Scudo (2007-2016 / MK 2) Today, we will look at the instructions to dismantle and replace the climate control controls and their bulbs on the Fiat Scudo. First, get inside th…
Fiat Scudo (2007-2016 / MK 2) Here’s how to remove the headlight bulbs on a Fiat Scudo: Open the front bonnet by pulling the lever located at the bottom right of the dashboard, an…

How to open the fuel flap of the Toyota Aygo?

The fuel flap of the Toyota Aygo can be opened by pulling the dedicated button located on the dashboard, on the left side of the steering column: this button should now be pulled upwards. This will unlock the mechanism that allows the flap to close, making it possible to open the fuel flap. You can then unscrew the cap underneath and refuel: after refuelling, reposition the cap and close the flap again.

Watch the video!


by ScegliAuto

More videos