Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Climate Control Controls on the Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: A/C controls

See other generations:
Video tutorial

Today, we will look at the instructions to dismantle and replace the climate control controls and their bulbs on the Fiat Scudo. First, get inside the vehicle and start removing the plastic cover on the dashboard by prying at the sides; then remove the standard radio using the appropriate extraction tools, and unscrew the side screws of the climate control controls, as shown in the video.

At this point, disconnect the wiring at the back to remove the controls, replacing the bulbs or knobs if necessary; apply the reverse procedure for reassembly!


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Fiat Scudo
How to Remove the Door Panel of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Before you begin, open the door of your Fiat Scudo. Start by unfastening and removing the inserts and covers of the door panel using a flathead screw…
How to Remove the Radio and Climate Controls from the Fiat Scudo 2
Fiat Scudo (2007-2016 / MK 2) In today's video, see how to remove the standard radio and climate controls from the second generation Fiat Scudo. First, get inside the vehicle and …
How to Dismantle the Rear Light and Replace the Bulbs on the Fiat Scudo
How to Dismantle the Rear Light and Replace the Bulbs on the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) The following instructions will show you how to dismantle and replace the rear light and its bulbs on the Fiat Scudo. First, open the rear doors and …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos