Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulbs on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Headlight bulb

Today, you will discover the instructions that will allow you to remove and replace the dipped and main beam bulbs of the front headlights on a Fiat Panda. First, open the bonnet of the vehicle and start by removing the plastic protective cover of the bulbs; unclip the metal spring and disconnect the electrical connector of the bulbs, removing the light from the optical group, as shown in the video. At this point, install the new dipped and main beam bulbs of the correct type (in this case, H4); check the light operation and replace the other bulb in the same manner.

Posted on 28 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulbs on the Fiat Panda 169
Replacing the Headlight Bulbs on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this short video, you will see how to remove and replace the headlight bulbs on the Fiat Panda 169, second series, following these simple and quic…
How to replace the rear headlight bulbs of the Fiat Panda 3
How to replace the rear headlight bulbs of the Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) Today we will explain how to replace the rear headlight bulbs of a Fiat Panda 3 vehicle. The bulbs we suggest using for replacement are the Bolch mod…
How to replace the front headlight bulbs in the Fiat Panda?
How to replace the front headlight bulbs in the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) In this tutorial, we can see how to replace the front headlight bulbs in the Fiat Panda, an extremely simple and fast operation. First of all, make s…

Other guides you may be interested in

How to Adjust the Headlights on a Dacia Sandero

To adjust the headlights on a Dacia Sandero, turn on the instrument panel by rotating the appropriate key in the ignition switch. Once the panel is on, use the knob located to the left of the steering column, at the bottom of the dashboard. Turning this knob counterclockwise will lower the beam of the headlights; conversely, turning it clockwise will raise the beam. Once the correct angle is found, you can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos