Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulbs on the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

In this short video, you will see how to remove and replace the headlight bulbs on the Fiat Panda 169, second series, following these simple and quick instructions. First, open and lift the bonnet of your car; then remove the plastic protective cap of the bulbs and disconnect the electrical connector of the lamp, as shown in the video.

At this point, remove the light and replace it with the new one of the correct type (in this case, type H4); all that's left is to connect it and reassemble everything, following the video tutorial to the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Replacing the Door Lock on a Fiat Panda 169
Replacing the Door Lock on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover the procedure to remove and replace the door lock cylinder on the front door of a Fiat Panda 169, second series. First, open the front door …
Replacing the Central Control Knob Bulbs on Fiat Panda 169
Replacing the Central Control Knob Bulbs on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Replacing the bulbs (T5 fitting) that illuminate the climate control knobs is very easy since the two knob assemblies are simply clipped into the cen…
How to Remove and Replace the Third Brake Light on a Fiat Panda 169
How to Remove and Replace the Third Brake Light on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will see the instructions that will allow you to remove and replace the third brake light, or replace the bulbs, on a Fiat Panda 169, seco…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos