Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Car stereo

In this video tutorial, you will see how to remove and replace the factory radio in a Fiat Punto, following the instructions provided below. First, get inside the vehicle and start by removing the plastic cover located on the side of the radio. Then, use the appropriate extraction tools to remove the radio from the dashboard, disconnecting the electrical connectors found on the back, as shown in the video. At this point, install the new radio or compatible multimedia system, making the necessary adjustments.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the car radio of the Fiat Grande Punto
How to install the car radio of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replacing the car radio on a Fiat Grande Punto is a simple and quick operation to be carried out independently. To perform this operation, we need to…
How to Remove the Radio from a Fiat Punto?
How to Remove the Radio from a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To remove the radio, first sit in the driver's seat of your Fiat Punto. Start by inserting the extraction keys into the appropriate holes on the fron…
How to enable the auxiliary output of the Fiat Punto Evo car radio
How to enable the auxiliary output of the Fiat Punto Evo car radio
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Following these short and simple instructions, we will see how to connect the AUX output on the Fiat Punto Evo and Grande Punto. First of all, let's …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos