Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Cabin air filter

The cabin air filter purifies the air inside the vehicle and is located under the passenger side glove compartment. To access it, remove the panel secured with plastic clips by simply pulling it outwards. Unscrew the screws of the filter cover using a ratchet spanner and carefully pull the filter downwards to avoid dust dispersal. Place a cloth on the floor to collect any dirt. Refit the new filter into its housing and close the cover with the screws. Reposition the cover.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Engine Air Filter, How to Proceed
Replacing the Engine Air Filter, How to Proceed
Fiat Punto (1999-2011 / MK 2, 188) Replacing the air filter is a very simple operation. The air filter should be replaced every 15,000 to 20,000 miles. The replacement is also influenc…
Replacing the Cabin Filter
Replacing the Cabin Filter
Fiat Punto (1999-2011 / MK 2, 188) Replacing the cabin filter in your car is very important as it protects against external agents entering the cabin. It is advisable to replace it eve…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Fiat Punto (1999-2011 / MK 2, 188) The following guide shows how to replace the cabin air filter. The filter is located in the dashboard area, passenger side. Simply unscrew the screw …

Other guides you may be interested in

How to Replace the Damaged Number Plate Bulb on Fiat 600

In this video, learn how to replace the damaged number plate bulb on a Fiat 600. Use a screwdriver or plastic lever to remove the number plate light unit located in the rear bumper of the car. Once the light unit is removed, extract the lamp holder with your hands, then disconnect the bulb from it. Fit the new bulb/LED (same size and voltage) into the lamp holder, then reassemble the light unit into the bodywork of the tailgate, pressing it until the clips lock automatically. Finally, test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos