Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

See other generations:
Video tutorial

The following guide shows how to replace the cabin air filter. The filter is located in the dashboard area, passenger side.

Simply unscrew the screw holding the box; it is not necessary to remove the box completely, you can pull it out partially. Once done, unscrew the two screws found on the cover, and by pulling downwards, remove the cover and replace the old filter with a new pollen filter.

It is advisable to perform this cabin air filter replacement every 15,000 miles or annually.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Replace the Air Conditioning Filter on a Fiat Punto
How to Replace the Air Conditioning Filter on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Before you can start, open the front passenger door of your Fiat Punto. Begin by unscrewing and removing the screws that secure the air conditioning …
How to replace the cabin air filter of the Fiat Punto
How to replace the cabin air filter of the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The cabin air filter of the Fiat Punto series 3 is located inside the cabin under the passenger side glove compartment. To replace the filter, it is …
How to Replace the Cabin Filter on the Fiat Punto
How to Replace the Cabin Filter on the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Regular maintenance of the cabin air filter in your Fiat Punto Mk3 is very important, especially if you want to use the air conditioning or heating s…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos