Do it yourself
Frequently asked questions about cars and motorcycles

How to change the air filter in the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

See other generations:
Video tutorial

To replace the engine air filter on the Fiat Punto, work with the engine cold and the car on level ground. Open the hood from the cabin and secure it. In the engine compartment, locate the air filter box, recognizable as a plastic container connected to the intake hose via a clamp or fitting.

Before opening the box, check how it is secured: depending on the configuration, it may have screws, clips, or a cover with latches. Loosen the necessary fasteners and, if needed, free the intake hose fitting just enough to create space, avoiding pulling on nearby wiring.

Lift the box cover and remove the old air filter by pulling it out straight, without pushing dirt toward the duct. Insert the new filter in the same direction as the previous one, ensuring that the perimeter frame fits correctly to avoid unfiltered air passages.

Close the box cover and restore all fasteners, then tighten the clamp or connection of the intake hose securely. Finally, check that the cover is properly seated along the entire edge and that there are no gaps at the intake fitting; start the engine and check for any unusual noises in the intake.


Posted on 11 January 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In the following guide, we will explain how you can easily complete the procedure that allows you to replace the engine air filter of your latest mod…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To correctly and safely replace the air filter of your Fiat Grande Punto, follow the instructions outlined below. Before proceeding, remember that th…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the air filter on a Fiat Grande Punto, open the bonnet to access the components inside the engine bay. To access the filter, unscrew the s…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos