Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a 2008 Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Headlight bulb

Replacing the front headlamp bulb (H7 fitting) is a straightforward DIY maintenance task. First, choose a quality bulb and consider replacing both for consistent illumination. Once the bonnet is open, remove the protective cover located behind the headlamp, disconnect the bulb's power connector, and unclip the retaining spring to extract the bulb from its housing. Fit the new bulb, secure it with the spring, reconnect the power connector, and reposition the cover behind the headlamp.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
Fiat 500 (2007-2021 / 312) …
How to Replace the Front Light Bulb on a Fiat 500?
How to Replace the Front Light Bulb on a Fiat 500?
Fiat 500 (2007-2021 / ) To replace the front light bulb on a Fiat 500, access the inner cover of the wheel arch corresponding to the bulb that needs replacing. Here, you wil…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos