|
Do it yourself
| |||
| ||||
How to Start the Fiat 500X with the Remote Control?
To start the Fiat 500X with the remote control, use the specific button located in the centre of the device, marked with "x2" inside a circular arrow. This button must be pressed twice in quick succession: you will hear two sounds from the horn, and then the car will start. To turn off the car, press the button twice again: you will notice that the engine will stop immediately after pressing the button.
Updated on 29 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat 500
(2014-2022 /
500 X)
In order to replace the battery of the Fiat 500X remote control, you need to remove the chrome cover located at the top of the device: once this cove…
Fiat 500
(2014-2022 /
500 X)
Replacing the flat battery of the Fiat 500X remote control is a very simple operation, as shown in the attached video guide, which is valid for both …
Fiat 500
(2014-2022 /
500 X)
Follow these steps to replace the battery in a Fiat 500X remote control: Take the remote and extract the metal key (located in the cover). Once the m…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.100
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |