Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote control battery of the Fiat 500X?

Model: Fiat 500 500 X - Years 2014-2022
Part: Key

Replacing the flat battery of the Fiat 500X remote control is a very simple operation, as shown in the attached video guide, which is valid for both Fiat Tipo and Fiat 500X since they share the same remote. Near the metal key, there are two small slots that allow you to open the rear cover; use a small flat screwdriver if you cannot apply enough force with your fingers. Once the cover is opened, you will see a circular cap that needs to be removed by turning it counterclockwise, using a coin or the replacement battery. Finally, just replace the battery (a CR2032) and reassemble everything by following the reverse procedure.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Fiat 500X
How to Replace the Key Battery of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) This brief video tutorial explains how to replace the battery of the key for the 2016 Fiat 500X. The 500X features a keyless remote that you can simp…
How to replace the remote control battery of the Fiat 500X?
How to replace the remote control battery of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) As shown in this tutorial, replacing the remote control battery of the Fiat 500X is an extremely simple and quick operation. You will need a replacem…
How to Replace the Remote Battery on the Fiat 500X
How to Replace the Remote Battery on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) The battery of the Fiat 500X remote is located on the back of the remote. To open the device, extract the flip key and, using a small flathead screwd…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos