|
Do it yourself
| |||
| ||||
How to Replace the Front Wishbone of the Fiat Doblo
Model: Fiat Doblo
223, MK 1, Doblo 1
- Years 2000-2009
Start the replacement of the wishbone of the Fiat Doblo, model 223, by securing the wheels with chocks and then loosening the fixing bolts with a 17 mm socket. At this point, lift the vehicle and completely remove the wheel. Continue the replacement procedure by cleaning the joints of the wishbone and removing the fixing element of the bracket that connects the suspension arm to the stabiliser bar with a 10 mm socket. Unscrew the fixing bolts that connect the bar to the bodywork with a 13 mm spanner, then unscrew the bolts that connect the bar to the rear part of the wishbone with an 18 mm spanner and then with a 13 mm spanner the bolts that connect the bar to the front part of the wishbone. At this point, using a pry bar, remove the bar and then unscrew with a 19 mm spanner the pin that fixes the ball joint to the steering knuckle. Finally, remove the fixing nut and disconnect the wishbone. Once the wishbone is removed, you can insert a new one and assemble it by following the same procedure described earlier but in reverse.
Updated on 11 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Doblo
(2000-2009 /
223, MK 1, Doblo 1)
Over time, the rubber part of the Fiat Doblò's windshield wipers hardens and does not clean the glass well, so we need to replace them for our safety…
Fiat Doblo
(2009-2021 /
263, Doblo 2, MK 2)
The radiator fan fuse on your Fiat Doblo is located inside the fuse box. The fuse box itself is situated in the engine compartment, near the battery.…
Fiat Doblo
(2022-2026 /
Doblo -3)
To quickly and safely replace the front headlight bulb of your Fiat Doblo third edition, simply follow the procedure described below. First, purchase…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.798
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |