Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : DIY camperization of a Fiat Doblò

Fiat Doblo - Video tutorial

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Bodywork
Operation: DIY camperization of a Fiat Doblò

Let's see one of the many solutions for camperizing a Fiat Doblò: this youtuber was based on extreme simplicity; a parquet that also allowed simple insulation, 40x40 varnished wooden modules in order to make full use of the space, which can be moved to serve as the base of the bed in the evening. The use of a simple camping stove, which in any case allows you to cook pasta and a simple second course, for the sink stainless steel salad bowls with tanks were used, one for clear water and one for dark water; the faucet with pump found on Amazon serves very well, but in the evening it must be disassembled to assemble the bed. To the windows, thermal blinds cut to size and attached to the windows. There is also a small portable toilet that folds up and doesn't take up much space. When it comes to going to sleep they arrange all the square boxes in the kitchen horizontally and spread out on top of the mattress and sleeping chess.


Posted on 3 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Doblo 2009-2021 - Where is the inertia switch on the Fiat doblo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos