Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fiat Doblò with Factory-Riveted Undertray

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Checks and maintenance

The video shows a common complaint among mechanics and DIY enthusiasts regarding the design of certain vehicles. On the 2017 Fiat Doblò (likely the facelift version), to perform a simple oil check, one would expect to easily remove the lower undertray of the vehicle. Instead of using screws or plastic clips, the cover is secured with rivets directly from the factory. Consequently, to access the oil drain plug (which is located directly beneath this cover), it is necessary to completely dismantle this cover: a much longer and more complicated operation than necessary for routine maintenance.

Posted on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for a Fiat Doblo?
What is the Fuse Diagram for a Fiat Doblo?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) The video attached to this article shows the fuse diagram for our Fiat Doblo. Fuses are electronic devices that protect the car's electrical componen…
Removing the Grille from Above the Bumper of a Doblo
Removing the Grille from Above the Bumper of a Doblo
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Remove the grille from above a Fiat Doblo? Here’s how to detach it from the front bumper. Using the appropriate screwdriver, unscrew the screws on to…
Replacing the Sun Visor on a Fiat Doblò
Replacing the Sun Visor on a Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Replacing the sun visor on a Fiat Doblò is really straightforward and accessible for everyone. To remove the old sun visor, first open it as if you a…

    Frequently Asked Questions

    • Doblo 2009-2021 - Where is the inertia switch on the Fiat Doblò? Read answer
    • Doblo 2009-2021 - Where is the horn on the Fiat Doblò located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos