Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump on a Fiat Doblò

Model: Fiat Doblo Doblo 1, MK 1, 223 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Pump

See other generations:
Video tutorial

To replace the windscreen washer pump on a Fiat Doblò, loosen the screws securing the inner cover of the front right wheel arch: once these screws are loosened, you can detach the wheel arch cover and access the components inside. Here you will find the windscreen washer pump, which must be freed from its housing by unscrewing the fixing screws and disconnecting the water supply tubes: this way, the device can be removed from its housing, replaced with a new part, and all removed components reassembled.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to know the fuse diagram of a Fiat Doblo
How to know the fuse diagram of a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) In this tutorial we can see the fuse diagram related to a Fiat Doblo vehicle. The first diagram shown is related to the fuse box located inside the v…
How to replace the timing belt of the Fiat Doblò 1.4
How to replace the timing belt of the Fiat Doblò 1.4
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Below we will discover the instructions that will allow us to disassemble and replace the timing belt of the Fiat Doblò 1.4. First, we open the hood …
Guide to replacing the timing belt of the Fiat Doblò 1.6 MultiJet
Guide to replacing the timing belt of the Fiat Doblò 1.6 MultiJet
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Below we will see the main instructions on how to disassemble and replace the timing belt of the Fiat Doblò 1.6 MultiJet. First, we open the hood of …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos