Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
500 X
- Years 2014-2022 Replacing the battery of a Fiat 500 key is a very simple operation that will only take a few minutes of your time. The first step to perform is to press the small button located near the metal part of the remote, in order to extract the key. The second step is to insert the key into the hole, to open the remote. The third step is to remove the worn-out battery and insert the new one, then close the remote. We insert the key again and test its proper functioning. If the key still has problems, reprogramming may be necessary.
Posted on 6 February 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.088
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |