Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Tail light bulb

Open and lift the boot lid to access the two screws located on the edge of the boot. Undo and remove them. Now, you can gently pull out the light unit, using a plastic lever to release the clips securing it on the other side. After removing the light unit, disconnect the connector, allowing you to work with the light separately and remove the rear cover to access the bulbs. Replace any faulty bulbs and retrace your steps for reassembly.

Updated on 23 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Rear Light Bulb on the Fiat Punto?
How to Replace the Rear Light Bulb on the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the rear light bulb on the Fiat Punto, open the tailgate to access the screws securing the rear light in its housing. After loosening thes…
How to Replace the Rear Headlamp Bulb on a Fiat Punto
How to Replace the Rear Headlamp Bulb on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Replacing the rear headlamp on a Fiat Punto is a straightforward task that can be done in the comfort of your own garage. Follow this tutorial to lea…
How to Replace the Rear Headlamp Bulb on a Fiat Punto Evo
How to Replace the Rear Headlamp Bulb on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief and simple guide, remove and replace the stop bulb in the rear headlamp of the Fiat Punto Evo, as well as the Grande Punto. First, open…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos