Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the LED in the Rear Light of the Fiat Punto Evo?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Light bulb

To replace the LED in the rear light of the Fiat Punto Evo, open the boot and unscrew the bolts next to the light. This will allow you to remove the light from its housing and disconnect the connector. Once the light is extracted, open it by removing the screws that secure the plastic cover at the back. When opened, replace the bulb and clean all contacts to avoid malfunctions. Finally, close the light and reposition it in its housing.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to disassemble and replace the rear light of the Fiat Punto Evo, as well as the Grande Punto. First, open …
How to Replace the Rear Headlamp Bulb on a Fiat Punto Evo
How to Replace the Rear Headlamp Bulb on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief and simple guide, remove and replace the stop bulb in the rear headlamp of the Fiat Punto Evo, as well as the Grande Punto. First, open…
How to Replace the Dashboard LEDs of a Grande Punto Evo
How to Replace the Dashboard LEDs of a Grande Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the dashboard LEDs of a Grande Punto Evo, start by removing the needles by pulling them upwards. Next, detach the backing by unclipping it…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos