Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Fiat Punto 199

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

In this guide, you will learn how to replace the bulbs in the rear light of a Fiat Punto 199. Open the boot of your car and using a cross-head screwdriver, unscrew the two securing screws of the light. Disconnect the light by pulling it towards you, detach the electrical connector, and remove the bulb holder after taking out the two screws; at this point, you can replace the damaged bulbs by pressing and turning them counterclockwise.

If you want to replace the indicator bulb, you will need a P21W; the position light in the centre is an R5W, and finally, the dual filament bulb (position light and brake light) is a P21/5W. Before reassembling the light, connect the bulb holder to the connector and check that everything works correctly.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replace the bulbs of the rear light on a Fiat Punto Evo. Let's see how to remove the light and replace the bulbs: open the boot lid, unscrew the secu…
How to Replace the Rear Headlight Bulbs
How to Replace the Rear Headlight Bulbs
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In the following video, you will learn the few simple steps to replace the rear headlight bulbs of a car. First, open the boot and unscrew the screws…
How to Replace the Rear Light Bulb on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Open and lift the boot lid to access the two screws located on the edge of the boot. Undo and remove them. Now, you can gently pull out the light uni…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos