Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Headlight bulb

Release and lift the bonnet. Next, compare the purchased bulb with the one installed in the headlight. To access it, go to the rear of the headlight. By removing the rear cover of the headlight, you will gain access to the bulbs located inside. You can now extract the bulb and disconnect it from the connector that supplies power to each bulb individually. Now, install the new bulb and retrace all the steps described in reverse for reassembling the various components, and you're done!

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Bulb on Fiat 500
Replacing Bulb on Fiat 500
Fiat 500 (2007-2021 / 312) Replace the headlamp bulb on a Fiat 500. Lift the bonnet and secure it. Remove the cover cap behind the front headlamp. After removing the covers, di…
How to Replace the Fog Light Bulb on a Fiat 500 X
How to Replace the Fog Light Bulb on a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the fog light bulb on a Fiat 500 X is a very simple task that can be done independently. Start by removing the wheel arch liner on the side…
How to replace the front headlight bulb on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) If you want to replace the front headlight bulb on your Fiat 500X yourself, carefully read the following instructions and put them into practice. Bef…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos