Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stop bulb in a Fiat 500 L

Model: Fiat 500 500 L - Years 2012-2023
Part: Tail light bulb

In this video tutorial, you can see how to replace the stop bulb in a Fiat 500 L by following some simple steps that will help you work independently. The materials you need: a screwdriver, an Allen key (provided with the car), a bulb (P21/5W); remove the clips to open the cover, once the cover is removed, disconnect the power connector, then unscrew the two screws to remove the bulb holder; once the bulb holder is removed, extract the old bulb and install the new stop bulb. Reassemble all parts in reverse order.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stop Bulb in a Fiat 500 L
How to Replace the Stop Bulb in a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you can observe how to replace the stop bulb in a rear light of a Fiat 500L. The first thing to do is to remove the rear opti…
How to replace the brake light bulb on a Fiat 500
How to replace the brake light bulb on a Fiat 500
Fiat 500 (2007-2022 / 312) To replace the brake light bulb on a Fiat 500, first, open the boot to expose the screws holding the rear light cluster in place. There are two screw…
How to Replace the Brake Light Bulbs in the Fiat 500?
How to Replace the Brake Light Bulbs in the Fiat 500?
Fiat 500 (2007-2022 / 312) In this tutorial, you will see how to replace the brake light bulbs in the Fiat 500, a very simple and quick operation. First, ensure that the key is…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos