Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

To replace the brake light bulb on a Fiat 500, open the rear hatch and locate the internal cover corresponding to the light cluster. Remove the plastic cover to access the retaining nuts of the light and unscrew them with a spanner.

Grasp the light cluster from the outside and gently pull it towards you to detach it from the bodywork. At the back, locate the brake light holder, turn it counter-clockwise and remove it. Extract the bulb by pressing and twisting it from the socket, insert the new one of the same type, then reassemble everything in reverse order until the light cluster is securely fixed.


Posted on 22 September 2026 by ScegliAuto


Related tutorials

How to Fix the Third Brake Light on the Fiat 500
How to Fix the Third Brake Light on the Fiat 500
Fiat 500 (2007-2024 / 312) Here’s how to change the bulb of the third brake light on a Fiat 500: Open the tailgate, locate the two plastic caps on the inner trim near the third…
How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
Fiat 500 (2012-2023 / 500 L) Replacing the rear light bulb of the 2015 Fiat 500 L is a straightforward task that you can do independently. First, open the boot. Next, remove the …
How to Change the Brake Light Bulb of the Fiat 500
How to Change the Brake Light Bulb of the Fiat 500
Fiat 500 (2007-2021 / 312) This brief and simple guide will show you the steps to remove and replace the rear light and its bulbs on the Fiat 500. First, move to the rear of th…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos