Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the rear taillight bulb of the 2015 Fiat 500 L.

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Rear light bulb
Operation: How to replace the rear taillight bulb of the 2015 Fiat 500 L.

Replacing the rear headlight bulb of the 2015 Fiat 500 L is a very simple operation, which can be done independently. The first thing to do is to open the trunk. The second thing to do is to remove the cover around the headlight. The third thing to do is to unscrew the four screws around the headlight. The fourth thing to do is to remove the headlight from its housing to disconnect the connector and remove the bulb. After completing the removal steps, we move on to the installation steps. We insert a new bulb, connect the connector, and install the headlight. We screw it back in and attach the cover.


Posted on 3 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - Why is the brake light of the Fiat 500 not working? Read Answer
    • 500 2007-2021 - Why are the brake lights of the Fiat 500 not working? Read Answer
    • 500 2007-2021 - Which taillights does the Fiat 500 mount? Read Answer
    • 500 2014-2022 - How to replace rear light bulbs in Fiat 500X? Read Answer
    • 500 2007-2023 - How many reversing lights are there on the Fiat 500? Read Answer
    • 500 2014-2022 - How many reversing lights does the Fiat 500X have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos