Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stop Bulb in a Fiat 500 L

Model: Fiat 500 500 L - Years 2012-2023
Part: Tail light bulb

In this video tutorial, you can observe how to replace the stop bulb in a rear light of a Fiat 500L. The first thing to do is to remove the rear optical group; to do this, you will need to open the tailgate and look near the light, inside the boot; then locate the plastic cap and remove the nuts found underneath. At this point, gently pull the light outward; disassemble the bulb holder located at the back of the light and locate the stop bulb. Remove the bulb by slightly twisting it and insert the new one. Finally, reinsert the bulb holder into the light, reposition the light onto the bodywork, screw the screws back in, and replace the internal plastic cover.

Posted on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Bulbs on Fiat 500
Replacing Rear Bulbs on Fiat 500
Fiat 500 (2007-2021 / 312) Open the boot door and unscrew the two screws that secure the light to the bodywork, disconnect the connector, and you're done. Now that you have rem…
How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Press the designated unlock button to extract the physical emergency key from the electronic key of your Fiat 500 X. Using the extracted physical key…
Replacing the Air Filter on the Fiat 500 L - 500 X
Replacing the Air Filter on the Fiat 500 L - 500 X
Fiat 500 (2012-2023 / 500 L) In this tutorial, learn how to remove and replace the engine air filter on the Fiat 500 L 1.3 MultiJet and the 500 X. First, open the bonnet and remo…

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos