Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake light bulb on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

To replace the brake light bulb on a Fiat 500, first, open the boot to expose the screws holding the rear light cluster in place. There are two screws located just below the boot lid that can be removed easily.

Once these screws are removed, pull the light cluster towards you to detach it. Be careful of the two side clips, which you will need to engage when refitting it. Disconnect the electrical connector using a plastic spatula for assistance. Remove the four screws securing the plastic cover at the back of the light cluster to access the bulbs.

Remember to never touch the bulbs with bare hands. Remove the brake bulb and replace it, then refit everything by reversing the sequence.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Light Bulb on a Fiat 500
How to Replace the Brake Light Bulb on a Fiat 500
Fiat 500 (2007-2024 / 312) To replace the brake light bulb on a Fiat 500, open the rear hatch and locate the internal cover corresponding to the light cluster. Remove the plast…
How to Fix the Third Brake Light on the Fiat 500
How to Fix the Third Brake Light on the Fiat 500
Fiat 500 (2007-2024 / 312) Here’s how to change the bulb of the third brake light on a Fiat 500: Open the tailgate, locate the two plastic caps on the inner trim near the third…
How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
Fiat 500 (2012-2023 / 500 L) Replacing the rear light bulb of the 2015 Fiat 500 L is a straightforward task that you can do independently. First, open the boot. Next, remove the …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos