Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Sedici
  6. : How to remove the exterior rearview mirror of the Fiat 16

Fiat Sedici - Video tutorial

Model: Fiat Sedici MK 1 - Years 2005-2014
Part: Outside rearview mirror
Operation: How to remove the exterior rearview mirror of the Fiat 16

Disassembly of the exterior rear-view mirror is simple to carry out but requires the removal of the door trim panel; start by removing the triangular-shaped plastic coating applied to the inside of the door pillar right in correspondence with the mirror seat; then remove the masking caps of the panel fixing screws inside the recess behind the window lifter push-button panel and the opening lever; Once the screws have been removed, unhook the panel and move it far enough away to disconnect the socket for the mirror adjustment controls and complete the disassembly by unscrewing the two fixing nuts.


Posted on 28 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos