Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the emblem on the Fiat Punto EVO

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Manufacturer emblem

Replacing the emblem on the Fiat Punto EVO may seem like a difficult task, especially if you do not have the instructions available when you receive the new emblem. However, in reality, this operation is very simple to perform independently. To carry out this operation, we need to open the front hood and unscrew the bumper screws, starting with the upper ones, then the side ones by releasing the wheel arch, and finally the lower screws. Once the screws are removed, we can detach the bumper and remove the grille. Unscrew the screw behind the emblem and install the new one. Install the bumper and close the hood.

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Badge/Logo on a Fiat Grande Punto
Replacing the Front Badge/Logo on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will learn how to remove and replace the badge or logo of the manufacturer on a Fiat Grande Punto, as well as on a Punto Evo. F…
How to Personalise the Fiat Logo on Your Car
How to Personalise the Fiat Logo on Your Car
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, see how to personalise the Fiat logo on a Grande Punto. First, the YouTuber uses a hairdryer to remove only the part with the "Fiat" l…
How to replace the glow plugs of the Fiat Punto Evo 1.3 Multijet
How to replace the glow plugs of the Fiat Punto Evo 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short guide, we will see the instructions that will allow us to disassemble and replace the glow plugs of the Fiat Punto Evo and Grande Punto…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos