Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlamp on a Fiat Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

To replace the front headlamp on a Fiat Punto, follow these steps. First, open the bonnet and locate the upper clip of the headlamp, usually found near the top of the headlamp assembly.

Use a screwdriver to unscrew the clip. Once the clip is removed, carefully move the headlamp forward to expose the electrical connector located behind the headlamp.

Disconnect the electrical connector by gently pulling it from the headlamp. Now, find the fixing screws around the edge of the headlamp; there are usually two or three screws holding the headlamp in place.

Use a screwdriver to unscrew these screws. Once removed, carefully extract the old headlamp from its housing.

Prepare the new front headlamp, ensuring it is compatible with your Fiat Punto's model and year. Position the new headlamp in the housing and refit the fixing screws to secure it. Connect the electrical connector to the new headlamp, ensuring it is firmly connected.

Finally, reposition the upper clip and screw it back in place. Check that the headlamp is correctly installed and functioning, then close the bonnet.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Let's see how to replace the front headlight bulbs of a Fiat Grande Punto. Open the bonnet by pulling the lever located at the bottom right of the da…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Do you want to change the front headlight bulbs on a Fiat Punto but don't know how? Let's see how to proceed in this instructional video. Open the en…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Change the bulbs in the front headlight of a Fiat Punto: open the bonnet by pulling the lever located at the bottom right of the dashboard, and secur…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos