Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wing of the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Accessory kit

To start this operation, you need to release the bonnet from the lever to lift it and secure it with the appropriate rod. Then, remove the bolts indicated in the video; they are located both on the upper part of the wing at the edge of the bonnet's bodywork and on the inner part of the wing, both at the front in contact with the rear of the bumper and at the front in contact with the bodywork between the door and the wing. Once you have completed these steps, retrace the described steps in reverse for reassembly.

Updated on 26 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Front fender replacement instructions on Fiat Grande Punto
Front fender replacement instructions on Fiat Grande Punto
Fiat Punto (1999-2011 / MK 2, 188) We see in this video the main instructions on how to remove and replace the front fender on a Fiat Grande Punto, following the instructions below. Fi…
How to replace the front fender of the Fiat Punto?
How to replace the front fender of the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To be able to replace the front fender of the Fiat Punto, you need to open the hood to access the engine compartment and loosen the screws located on…
How to Replace the Wing of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) First, release the bonnet using the appropriate lever in your vehicle. Then, lift it and secure it with the prop rod. Now, remove the bolts indicated…

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos