Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Replacing the Front Wing on a Fiat Grande Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011

In this video, see the main instructions on how to remove and replace the front wing on a Fiat Grande Punto, following the steps outlined below. First, lift the vehicle on the affected side and open the bonnet; then, unscrew the fastening screws located on the top of the wing using a screwdriver or Torx key. At this point, gently detach the triangular piece of the mirror with a flat tool and remove the front wheel: unscrew the wheel arch screws and the lower screws to remove the wing. Apply the reverse procedure for reassembly!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, we will see how to dismantle and replace the external wing mirror on the Fiat Grande Punto, as well as on the Punto Evo. Firs…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) As seen in this tutorial, removing the external wing mirror on a Fiat Grande Punto is a straightforward task. You won't need to dismantle the door pa…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Here are the instructions to help you remove and replace the front wheel bearing of the Fiat Grande Punto, as well as the Punto Evo. First, lift the …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos