Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Kuga
    4. : Diesel particulate filter

Ford Kuga - Diesel particulate filter

Diesel Particulate Filter Ford Kuga (2008-2012 / c 394, mk 1)

Ford Kuga (2008-2012 / C394, MK 1)
How to replace the differential pressure sensor of the particulate filter on the Ford Kuga.
On the Ford Kuga, the differential pressure sensor of the DPF is connected to the particulate filter via two tubes: one for high pressure and one for low …Read all…
Posted on 19 December 2025 by ScegliAuto
Ford Kuga (2008-2012 / C394, MK 1)
How to Clean the Diesel Particulate Filter on the Ford Kuga?
To clean the diesel particulate filter, it must be removed: it is located at the bottom of the vehicle, near the driver's side door. Using a 15mm spanner, …Read all…
Posted on 30 May 2026 by ScegliAuto
Cigarette lighter (1) Airbag (2) Alternator (3) Shocks (1) Car stereo (15) Roof rack bars (2) Battery (30) Transmission (2) Body (10) Key (39) Timing belt (12) A/C controls (1) Onboard computer (8) Checks and maintenance (21) Oil pan (1) Shifter boot (1) Bearing (2) Headlight (15) Tail light (9) Fog lights (6) Diesel particulate filter (2) Air filter (6) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (11) Oil filter (7) Parking brake (3) Fuel injectors (1) Window switch (1) Light bulb (6) Side marker bulb (9) Headlight bulb (24) Tail light bulb (9) Instrument panel light (1) License plate light (3) Handle (3) Power window motor (1) Transmission fluid (2) Engine oil (8) Power steering fluid (1) Clock (5) Door trim panel (10) Front bumper (1) Brake pads (4) Shift knob (2) Fuel pump (1) Fuse box (29) Seat (3) Door lock (1) Side mirror (7) AdBlue warning light (2) Warning light – error code (31) (26) Tire pressure warning light (9) Service warning light (104) Engine mount (1) Windshield wipers (5) Windshield washer nozzle (1) Blower motor (1) Side window (2) Steering wheel (1)

How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson

Today, we will discover the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Hyundai Tucson; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and start the ignition; next, navigate to the onboard computer settings using the controls on the steering wheel until you reach the tyre pressure monitoring section, as shown in the video. At this point, confirm and execute the reset of the TPMS warning light!

Watch the video!


by ScegliAuto

More videos