Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Transit
  6. : 1978-1986 (MK 3)

Ford Transit Years 1978-1986 (MK 3)

Ford Transit (1978-1986 / MK 3)
How to Replace the Timing Belt on a Ford Transit MK3

This version of the Ford Transit has a longitudinal engine, and the timing belt must be replaced every 62,000 miles or ten years. You can find a complete kit …Read all…
Posted on 8 June 2026 by ScegliAuto
Ford Transit (1978-1986 / MK 3)
Replacing the Thermostat on a Ford Transit MK3

In this simple tutorial, you will learn how to replace the thermostat on a Ford Transit MK3. You will need a flathead screwdriver and a 13mm spanner. Start by …Read all…
Posted on 1 August 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Alternator (1) Air conditioning (1) Car stereo (13) Anti-roll bar (1) Roof rack bars (1) Battery (44) Grille (2) Transmission (2) Spark plugs (5) Glow plugs (2) Body (16) Control unit (1) Key (45) Timing belt (19) V-belt (5) Onboard computer (3) Checks and maintenance (24) Throttle body (1) Dashboard (3) Shifter boot (1) Bearing (3) Brake rotors (19) Side marker light (1) Headlight (13) Tail light (4) Air filter (14) Cabin air filter (30) Diesel fuel filter (20) Oil filter (4) Parking brake (4) Clutch (3) Grille (12) Fuel injectors (9) Window switch (1) Light bulb (6) Side marker bulb (3) Headlight bulb (19) Tail light bulb (10) Instrument panel light (3) License plate light (2) (1) Handle (9) Engine (3) Starter motor (11) Transmission fluid (1) Engine oil (8) Clock (32) Door trim panel (15) Front bumper (3) Rear bumper (1) Brake pads (17) Shift knob (1) Pump (1) Fuel pump (5) Car door (4) Instrument cluster (7) Radiator (2) Wheel (13) Fuse box (119) Seat (10) Crankshaft position sensor (1) Door lock (9) Suspension system (1) Side mirror (18) Rearview mirror (1) AdBlue warning light (21) Warning light – error code (23) (12) Tire pressure warning light (5) Service warning light (213) Engine mount (2) Brake drums and shoes (1) Fuel cap (2) Windshield wipers (1) Thermostat (1) Drivetrain (1) EGR valve (5) Blower motor (3) Steering wheel (1)

See also:

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos