Do it yourself
Frequently asked questions about cars and motorcycles

Ford Transit - Pump

Pump Ford Transit (2014-2024 / mk 8)

Ford Transit (2014-2024 / MK 8)
How do you replace the injection pump of the Ford Transit?

In order to replace the injection pump of the Ford Transit, you need to open the hood so that you can access the components located inside the engine …Read all…
Posted on 24 April 2024 by ScegliAuto

Cigarette lighter (1) Airbag (4) Alternator (1) Air conditioning (1) Car stereo (13) Anti-roll bar (1) Roof rack bars (1) Battery (44) Grille (2) Transmission (2) Spark plugs (5) Glow plugs (2) Body (16) Control unit (1) Key (45) Timing belt (19) V-belt (5) Onboard computer (3) Checks and maintenance (24) Throttle body (1) Dashboard (3) Shifter boot (1) Bearing (3) Brake rotors (19) Side marker light (1) Headlight (13) Tail light (4) Air filter (14) Cabin air filter (30) Diesel fuel filter (20) Oil filter (4) Parking brake (4) Clutch (3) Grille (12) Fuel injectors (9) Window switch (1) Light bulb (6) Side marker bulb (3) Headlight bulb (19) Tail light bulb (10) Instrument panel light (3) License plate light (2) (1) Handle (9) Engine (3) Starter motor (11) Transmission fluid (1) Engine oil (8) Clock (32) Door trim panel (15) Front bumper (3) Rear bumper (1) Brake pads (17) Shift knob (1) Pump (1) Fuel pump (5) Car door (4) Instrument cluster (7) Radiator (2) Wheel (13) Fuse box (119) Seat (10) Crankshaft position sensor (1) Door lock (9) Suspension system (1) Side mirror (18) Rearview mirror (1) AdBlue warning light (21) Warning light – error code (23) (12) Tire pressure warning light (5) Service warning light (213) Engine mount (2) Brake drums and shoes (1) Fuel cap (2) Windshield wipers (1) Thermostat (1) Drivetrain (1) EGR valve (5) Blower motor (3) Steering wheel (1)

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos