Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : Dashboard light

Ford Transit - Dashboard light

Ford Transit (1986-1994 / MK 4)
Replacement of the dashboard bulbs of the Ford Transit.
Let's see how to replace the dashboard lights of the Ford Transit. Using a cross-head screwdriver, unscrew the three screws, two below and one above, that …read all…
Posted on 30 December 2023 by ScegliAuto
Ford Transit (1986-1994 / MK 4)
How to install the buzzer alarm with lights on a 1994 Ford Transit.
In this video, we see how to make a small and inexpensive modification to an older vehicle like a 1994 Ford Transit; connecting a horn to the parking lights, …read all…
Posted on 7 May 2023 by ScegliAuto
Ford Transit (1986-1994 / MK 4)
Replacement of the dashboard instrument cluster lights of the Ford Transit.
Let's discover in this guide how to disassemble and replace the bulbs in the instrument panel of the Ford Transit dashboard. First, let's get in the vehicle …read all…
Posted on 17 April 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (1) Air conditioning (1) Car stereo (6) Roof Rack Bars (1) Battery (24) Gearbox (1) Spark plugs (2) Glow plugs (2) Bodywork (6) Key (14) Timing belt (7) V-belt (2) -board computer (24) Checks and maintenance (97) Throttle body (1) Dashboard (1) Gearshift gaiter (1) Bearing (1) Brake discs (9) Headlight (7) Tail light (2) Air filter (12) Cabin air filter (25) Diesel filter (11) Oil filter (3) Hand brake (1) Clutch (2) Grille (5) Injectors (7) Window lift switch (1) Light bulb (6) Side turn signal light bulb (2) Headlight bulb (7) Rear light bulb (7) Dashboard light (3) Third brake light (1) Handle (2) Engine (3) Starter motor (10) Gear oil (1) Engine oil (12) Door panel (14) Rear bumper (1) Brake pads (9) Tires (2) Gear Shift Knob (1) Pump (1) Fuel pump (3) Door (1) Instrument cluster (28) Radiator (2) Wheel (9) Fuse box (64) Seat (6) Lock (3) Suspensions (1) Outside rearview mirror (10) Interior rearview mirror (1) Engine mount (1) Drums and shoes (1) Windscreen wipers (1) Thermostat (1) EGR valve (2) Interior blower (1)

How do I reset the Jeep Compass Start & Stop system?

In order to reset the Start & Stop system of the Jeep Renegade you need to open the hood in order to access the battery located inside the engine compartment. The car's Start & Stop system is activated automatically and it will not be necessary to carry out any procedure to put it into operation. In order to reset the system it will therefore be necessary to disconnect the connector located in the lower part of the battery, so that it is reconnected after a few seconds. After the connection is successful, it will be possible to verify that the system has been reset.

Watch the video!


by ScegliAuto

More videos