Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dashboard Instrument Cluster Lights in the Ford Transit

Model: Ford Transit MK 4 - Years 1986-1994
Part: Instrument panel light

In this guide, discover how to remove and replace the bulbs in the dashboard instrument cluster of the Ford Transit. First, get into the vehicle and start by removing the plastic cover of the instrument cluster. Then, unscrew the fixing screws to remove the instrument cluster from the dashboard, disconnecting the electrical connector as shown in the video. At this point, remove the small bulbs located behind the cluster and replace them with new ones. Finally, reassemble the instrument cluster by reversing the disassembly procedure!

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Instrument Cluster on Ford Transit
Replacing the Instrument Cluster on Ford Transit
Ford Transit (2000-2006 / MK 6) Do you want to remove the instrument cluster from the Ford Transit? Remove some plastics to facilitate the disassembly of the instrument cluster. Use…
Removing the Instrument Cluster from the Ford Transit Dashboard
Ford Transit (2014-2024 / MK 8) In this video tutorial, you will learn how to remove the instrument cluster from the dashboard of a Ford Transit, following the instructions below. F…
Replacing the Dashboard Bulbs on the Ford Transit
Replacing the Dashboard Bulbs on the Ford Transit
Ford Transit (1986-1994 / MK 4) Let's see how to replace the dashboard lights on the Ford Transit. Using a cross-head screwdriver, unscrew the three screws, two below and one above,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos