Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Headlight bulb

If the position light bulb burns out, we must immediately proceed with the replacement for our safety and to avoid fines. To do this, we open the front hood, unscrew the three screws that hold the central mask so that we can remove it, then we unscrew, with a torx key, the screws that lock the headlight containing the bulb to be replaced. We remove the headlight and disconnect the electrical connector, remove the rubber protective cap on the back, remove the bulb holder and remove the burnt bulb. We insert the new bulb, put the bulb holder back in place, apply the cap, connect the connector, position the headlight and lock it with its screws, put back the mask and screw the locking screws.

Posted on 23 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Ford Fiesta
Replacement of the front headlight bulb of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Let's see how to proceed to replace the low beam headlight bulb of the Ford Fiesta. We open the hood of the engine compartment and position ourselves…
Replace Indicator Bulbs on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replacing the indicator bulbs mounted in the front headlamp of a Ford Fiesta. Here’s how to do it. Open the front bonnet by pulling the lever located…
Removing Front Headlight Bulbs on Ford Fiesta
Removing Front Headlight Bulbs on Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Let's look at removing the front headlight bulbs on a Ford Fiesta. Lift the bonnet by pulling the lever inside the vehicle. Remove the front cover to…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos