Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Battery

The main instructions in this guide will show us how to disassemble and replace the battery of the Ford Transit. First, we open the front door on the driver's side and start disassembling the front seat by unscrewing the fixing screws found on the guides; then we lift the seat to access the battery compartment, removing the cover located on the floor, as shown in the video. At this point, we disconnect both battery terminals, removing it and replacing it with the new one (of the correct type and with the same amperage); we reinstall the battery in the correct direction, finally reassembling the front seat!

Posted on 27 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2014-2024 / MK 8) If the key of your Ford Transit Mk8 has stopped working due to a completely exhausted battery and you want to find out how to replace it, all you hav…
Ford Transit (2014-2024 / MK 8) Today's step-by-step instructions will show us how to disassemble and replace the battery of the Ford Transit Connect. First, we open the hood of the…
Ford Transit (2014-2024 / MK 8) Replacing the battery of the key remote for a Ford Transit vehicle does not require difficult steps, you will only need a small screwdriver with a fl…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2014-2024 - Where is the battery in the Ford Transit? Read answer
    • Transit 2014-2024 - Where is the Ford Transit Custom battery located? Read answer
    • Transit 2014-2024 - Where is the battery located on a Ford Transit Custom? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos