Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Ford Transit Connect

Model: Ford Transit MK 8 - Years 2014-2024
Part: Battery

Today's step-by-step instructions will show us how to disassemble and replace the battery of the Ford Transit Connect. First, we open the hood of the car and locate the battery, which is located on the right side of the engine compartment; then we remove the engine air filter box, disconnecting the intake hose, as shown in the video. At this point, we disconnect both battery terminals (positive and negative), remove it and replace it with the new one (having the same amperage); make the electrical connection and start the engine!

Posted on 10 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2014-2024 / MK 8) Here's how to replace the battery of the key, and therefore the remote control, of the Ford Transit Connect. It is obvious to say that you realize th…
Ford Transit (2014-2024 / MK 8) In today's tutorial, you will see the main steps to remove and replace the engine battery of the Ford Transit Connect. First, open the bonnet and sta…
Ford Transit (2006-2014 / MK 7) Today, follow these instructions to remove and replace the starter motor on a Ford Transit Connect. First, open the bonnet and disconnect the battery…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2014-2024 - Where is the battery in the Ford Transit? Read answer
    • Transit 2014-2024 - Where is the Ford Transit Custom battery located? Read answer
    • Transit 2014-2024 - Where is the battery located on a Ford Transit Custom? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos