Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ecosport
    4. : How to replace rear light bulbs on Ford Ecosport

Ford Ecosport - Video tutorial

Model: Ford Ecosport MK 1, BK - Years 2012-2023
Part: Rear light bulb
Operation: How to replace rear light bulbs on Ford Ecosport

First of all, to replace the rear light bulbs it will be necessary to physically remove the headlight from the car, to do this you will have to open the flap on the carpet inside the trunk near the lighthouse to be removed, open the flap a screw will be visible in plastic that can be unscrewed by hand. After removing the plastic screw, you can proceed to unscrew the two screws on the innermost side of the headlight which are usually hidden by the boot latch, once removed the headlight should come off easily. At this point you will have access to the rear part of the headlight where the power plug will be connected and there will be a rubber gasket that must be extracted by levering with your hands. Once the gasket has been removed, there will be three screws which must be unscrewed to gain access to the lamp holder compartment. Lamp holders are the classic found on almost all vehicles, so it will be enough to press the bulb and rotate it half a turn to extract it and replace it with a new one. Once this is done, the lamp holder compartment can be closed with the three screws and the gasket and therefore also the headlight can be reassembled, paying particular attention to fit the track pin on the external end well, once the headlight is the screws removed previously can be put back in place to complete the job. It is advisable to test the operation of the bulbs before reassembling everything to avoid unpleasant surprises when the work is finished.


Posted on 13 November 2023 by ScegliAuto

How to set the time on the Peugeot 308

If we need to change the time on this car we can follow the instructions given in this video tutorial and read the instructions below. First of all, access the driver's seat and turn on the ignition. On the right multifunction lever there are the controls with the arrows to scroll the various menu functions and scroll the various functions up to "display adjust", after which press the button behind the lever to change the time, once set the new value press again the key with the arrow indication and modify the minutes in this way the work will be completed.

Watch the video!


by ScegliAuto

More videos