Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Side Lights of the Ford EcoSport Titanium Mk1

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Tail light

This guide shows how to replace the rear side lights of the Ford EcoSport Titanium Mk1. The first step is to open the protective panel of the light compartment from inside the boot. Next, you need to unscrew the plastic pin that holds the light in place. From the edge of the body, remove the two Torx T20 screws to completely free the light unit. At this point, simply pull out the unit and disconnect the electrical cable. Refit the light in reverse order. Check the correct operation of the light before hitting the road.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats in the Ford EcoSport?
How to remove the rear seats in the Ford EcoSport?
Ford Ecosport (2012-2023 / BK, MK 1) In this tutorial we can see how to remove the rear seats in the Ford EcoSport, an extremely simple and fast operation. First of all, we open both rea…
How to open the trunk of the Ford Ecosport
How to open the trunk of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Opening the trunk of the Ford Ecosport Titanium is a very simple and quick operation to be carried out independently. To perform this operation, we m…
How to Lower the Rear Seats on a Ford Ecosport
How to Lower the Rear Seats on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) This brief and simple guide outlines the steps to lower the rear seats on a Ford Ecosport. First, open the rear tailgate and start pulling the lever …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos