Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Ford Tourneo Courier Van?

Model: Ford Tourneo MK 2 - Years 2013-2024
Part: Key

In this tutorial, you will see how to replace the battery of the remote for the Ford Tourneo Courier van, a very simple and quick operation. For this, you will need a small flat-head screwdriver and a replacement CR2032 battery. First, locate the slot on the back of the remote, then use the screwdriver to pry it open and separate the two halves. Next, open the lower half, remove the old battery, and insert the replacement, ensuring you respect the polarity. To reassemble, simply follow the reverse procedure.

Posted on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the light bulbs in the Ford Tourneo Courier
How to change the light bulbs in the Ford Tourneo Courier
Ford Tourneo (2013-2024 / MK 2) In the following article, we will show you how to replace the front headlight bulb of the Ford Tourneo Courier. To perform this operation, no tools w…
Resetting the Maintenance Light on a 2024 Ford Tourneo Courier
Resetting the Maintenance Light on a 2024 Ford Tourneo Courier
Ford Tourneo (2013-2024 / MK 2) In this very brief guide, see how to reset the maintenance light on a 2024 Ford Tourneo Courier. Start the operation by pressing and holding the brak…
How to Reset the Service on the Ford Tourneo Connect Van?
How to Reset the Service on the Ford Tourneo Connect Van?
Ford Tourneo (2013-2024 / MK 2) In this tutorial, you will see how to reset the service on the Ford Tourneo Connect van, a very simple and quick operation to perform only after comp…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos