Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulb of the Ford Expedition

Model: Ford Expedition U324 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlight bulb of your Ford Expedition, follow the step-by-step procedure outlined in this guide. First, purchase a new bulb and ensure it is suitable for the rear headlight of your vehicle.

Then, fully lift the rear hood and remove the two screws located next to the headlight. Once done, pull the headlight towards you and disconnect the electrical connector.

Finally, replace the faulty bulb with the new one and reinstall the headlight correctly.


Posted on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bulbs in the Ford Expedition
How to Replace the Front Bulbs in the Ford Expedition
Ford Expedition (2007-2017 / U324) In today's video, you will see how to replace the front bulbs in the Ford Expedition. We recommend performing this operation only after allowing the …
Where to Find the Fuse Box of the Ford Expedition
Where to Find the Fuse Box of the Ford Expedition
Ford Expedition (2003-2006 / U222) In this new guide for all Ford Expedition owners, discover the steps you need to take to locate the fuse box containing all the fuses of your vehicle…
Where to Find the Fuse Box of the Ford Expedition
Where to Find the Fuse Box of the Ford Expedition
Ford Expedition (2003-2006 / U222) If some electrical components in your Ford Expedition are experiencing issues and you want to find their respective fuses, just read this guide and f…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos