Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs in the Ford Expedition

Model: Ford Expedition U324 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Light bulb

See other generations:
Video tutorial

In today's video, you will see how to replace the front bulbs in the Ford Expedition. We recommend performing this operation only after allowing the vehicle to rest so that you can work on a cold vehicle.

Open the hood and proceed to remove the front headlights by unscrewing the corresponding screws securing them to the body. Then, remove the cover from the housing and proceed to take off the rubber cap from the housing.

Extract the burnt-out bulb and replace it with a new one of the same type. Operation complete.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Replacing the Headlights on the Ford Expedition
Replacing the Headlights on the Ford Expedition
Ford Expedition (2018-2025 / U553) Today, we will see the guide that will allow you to remove and replace the headlights on the Ford Expedition in simple and quick steps. First, open t…
How to find the fuse diagram of a Ford Expedition
Ford Expedition (2003-2006 / U222) The diagram shown in the selected video displays the fuse box located in the cabin of the Ford Expedition vehicle; the diagram shows fuses assigned t…
Where is the fuse box of the Ford Expedition located?
Where is the fuse box of the Ford Expedition located?
Ford Expedition (2003-2006 / U222) If some electrical components in your Ford Expedition are experiencing malfunctions and you want to find out where the respective fuses are located, …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos