Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Tail light bulb

Replacing the rear light bulbs on a Ford Fiesta is a straightforward task that does not require special tools. First, access the boot at the rear of the light, where you will notice a flap in the carpet. Open the flap to reach the back of the light, where you will find a plastic screw that can be undone with a flathead screwdriver. Once the plastic screw is removed, pull the light out of the car with some force; it will remain connected to the car only by the power connector, which can be disconnected to allow for the removal of the light. At this point, you will have access to the back of the light where the various bulb holders are located, which can be removed to access the bulbs for replacement.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear light and replace the bulbs of the Ford Fiesta
How to remove the rear light and replace the bulbs of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The instructions in this guide will show us how to disassemble and replace the rear light and its bulbs of the Ford Fiesta. First of all, we open the…
Removing the Rear Light on a 2008 Ford Fiesta
Removing the Rear Light on a 2008 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, you will learn how to remove the rear light to replace the bulbs on a 2008 Ford Fiesta. First, open the boot lid and unscrew the…
How to Change the Rear Light Bulb on the Ford Fiesta
How to Change the Rear Light Bulb on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, we will go through the main steps to remove and replace the bulbs of the rear light on the Ford Fiesta. First, open the boot lid and s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos