Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Headlight bulb replacement

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Headlight bulb
Operation: Headlight bulb replacement

The first operation consists in releasing the bulb holder holding spring by moving it to the left. Carefully remove the bulb holder and to facilitate the operation completely remove the retaining hook. Unhook the lamp retaining hook and remove it completely taking care not to drop it. Remove the lamp from the socket. Refit the new lamp in the lamp holder paying attention to the reference notch in order to fit the lamp correctly. Be careful not to touch the lamp bulb with your hands. Carefully refit the lamp retaining hook and fit the assembly into the headlight checking that the hooks and gasket are in place correctly.


Posted on 5 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How to replace the headlight bulb on a Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos