Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Heating Control Unit from a Ford Fiesta

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002

In this video, we will see how to remove the heating control unit from a Ford Fiesta. Get inside the cabin and start by removing the radio, using specific tools that allow you to insert them into the designated release holes. Disconnect the electrical connector of the radio and remove the plastic panel where the climate control knobs are located: also disconnect the electrical cables at the back. To do this, press the tabs with something sharp, being careful not to damage the pins or other components. You have finished removing the control unit!

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Heater Radiator
Removing the Cabin Heater Radiator
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) One of the appreciated features of Ford is the ease of maintenance. This video demonstrates how simple it is to replace the heater radiator; after re…
How to Replace the Heater Radiator on Ford Fiesta
How to Replace the Heater Radiator on Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How do you replace the heater radiator in a Ford Fiesta? In this video, see how to remove the radiator from its housing. Using a screwdriver, unscrew…
Removing the Cabin Heater Radiator from a Ford Fiesta 5
Removing the Cabin Heater Radiator from a Ford Fiesta 5
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this guide, you will discover how to remove and replace the internal heater radiator of the fifth series Ford Fiesta. First, get inside the vehicl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos