Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removing the Ford Focus TDCi injectors

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Injectors
Operation: Removing the Ford Focus TDCi injectors

In today's video tutorial we will see how to remove the injectors of a 2008 Ford Focus TDCi. First we open the bonnet and we go to disconnect the various cables and connectors that we find above the injectors: then we go to remove the cover by removing the injectors at the same time . In the video, a functional test is carried out. At this point we are going to disassemble the injectors: to do this we will remove the old injector by pressing the tabs and insert the new one by hooking it, as shown in the video; after having given a lubricated we go to reassemble all the components.


Posted on 19 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How much do the Ford Focus 1.6 TDCi injectors cost? Read Answer
    • Focus 2004-2011 - What problems do Ford Focus injectors have? Read Answer
    • Focus 1998-2004 - Does the Ford Focus 1.6 TDCi have problems with the injectors? Read Answer
    • Focus 2004-2011 - How to replace the injectors in a diesel-powered Ford Focus? Read Answer
    • Focus 2004-2011 - How much do Ford Focus diesel injectors cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos