Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How do you replace the injectors of the Ford Focus 1.6 TDCi?

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Injectors
Operation: How do you replace the injectors of the Ford Focus 1.6 TDCi?

To be able to replace the injectors of the Ford Focus 1.6 TDCi you have to open the hood to access the engine compartment, so that the plastic cover of the upper part of the engine block is removed. By removing this cover, it will be possible to access the coils by disconnecting their connectors and accessing the injectors below. The latter can then be removed from their housing and replaced with new spare parts. After replacement, it will be possible to connect the coils to the injectors again and cover the engine with the special plastic cover.


Posted on 31 July 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - How much do the Ford Focus 1.6 TDCi injectors cost? Read Answer
    • Focus 2004-2011 - What problems do Ford Focus injectors have? Read Answer
    • Focus 1998-2004 - Does the Ford Focus 1.6 TDCi have problems with the injectors? Read Answer
    • Focus 2004-2011 - How to replace the injectors in a diesel-powered Ford Focus? Read Answer
    • Focus 2004-2011 - How much do Ford Focus diesel injectors cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos